Wet Felt Roll Positions in the "Upper Press Section" are normally driven rolls used to guide the "Felt" which is a synthetic material that goes between press rolls & Dryer Drums. The felt serves as a place to receive the pressed out water. Felt Rolls function to support the felt which also supports the wet paper web and guides it through the press section. Felts are also used in the dryer section to keep the sheet in close contact with the dryers and increase heat transfer. Traditional Paper Making of Kraft Paper for example; Wet Felt Roll Positions experience roll contamination issues from Secondary Fiber / "Size-Starch" & "Stickies" from recycled paper stock. For Tissue Towel Paper Making, contamination issues from "Fine Paper Particles, Wet Strength Additives & Glue" are main contamination issues.. Our PC-315 and PC-306 offer properties such as Release / Easily Cleanable / Wear & Corrosion Resistance characteristics. The PC-315 and PC-306 coatings have been successfully proven solutions for all types of Paper Making processes. The coatings' properties offer the performance to eliminate contamination issues which causes sheet defects & sheet breaks thus causing quality issues and unnecessary down times. Many Paper Mills are able to eliminate the use of Doctor Blades and Cleaning Showers due to the extreme High Release Properties of our PC-315 and PC-306 coatings. Recently recorded sheet breaks from a customer of 155 sheet breaks occurring over a 3 month time frame due to contamination resulted in "0" sheet breaks over the same time frame after switching Wet Felt Roll coverings to our PC-315 coating system.

    Products

    Showing 25 results for: Wet Felt Rollers
  • 70c1931b-46e1-4781-f5e4-34d58904cebf-admin-thumb

    Chrome Plating

    Our chrome plating is designed and applied to prevent corrosion, help protect critical surfaces on rollers.

    See also our improvement …

  • young_guns

    Wear & Abrasion

    From Mining, Pulp and Paper, Converting, Chemical, Oil and Gas, even in the Medical Industries parts wear due to exposure …

  • traction-coatings

    Surface Traction

    By using a high traction coating, slippage is eliminated resulting in a more consistent performance resulting in improved machine traction. …

  • Teflon being sprayed

    Thermal Conductive

    Thermally Conductive and Semi-Conductive Coatings do not significantly impede the flow of heat in or out of the substrate that …

  • plasma-logo-PRODUCTS

    Thermal Insulating

    Thermal Insulating coatings prevent the substrate from giving up internal heat or absorbing heat from an external source.

  • Ink pan

    Release & Cleanability

    We are a certified DuPont Licensed Industrial Applicator (DLA), a user of Whitford coatings, and we blend our own, resulting …

  • View All Products

    Services

    Showing 48 results for: Wet Felt Rollers
  • 70c1931b-46e1-4781-f5e4-34d58904cebf-admin-thumb

    Chrome Plating

    Our chrome plating is designed and applied to prevent corrosion, help protect critical surfaces on rollers.

    See also our improvement …

  • Thermal spraying gates

    Thermal Spray

    This is the method of applying materials onto a prepared base material by heating particles in the stream of a …

  • powders

    Ultra Sonic Test

    An ultra sonic test is the testing of a material to determine any flaws within it.

  • young_guns

    Wear & Abrasion

    From Mining, Pulp and Paper, Converting, Chemical, Oil and Gas, even in the Medical Industries parts wear due to exposure …

  • plasma-logo-PRODUCTS

    Thermal Insulating

    Thermal Insulating coatings prevent the substrate from giving up internal heat or absorbing heat from an external source.

  • crowning

    Roll Run Out

    Roller run out is a measurement of the roller’s surface roundness compared to the bearing surface.

  • View All Services