-
EGL Conductor Rollers
EGL conductor rollers are used in electro galvanizing lines and need to be corrosion and abrasion-resistant.
Benefits:
Solution to reduce wear.
Best Used For:
EGL Conductor Rollers
View Details -
Electric Arc
This process uses materials in wire form, but the heat source is the arcing of two electrically conductive wires. Material is melted and propelled on the part at a greater velocity than metallizing.
Benefits:
Higher temperatures allow for an increased source of base materials, faster rates of deposition, and improved bond and coating density.
Best Used For:
Utilized to apply metal based coatings.
View Details -
Electric Arc Furnace
We engineer and apply coating solutions that significantly increase the life of water-cooled electric arc furnace duct work.
Benefits:
Solutions are applicable on-site
Best Used For:
A wide variety of industries.
View Details -
Electrically Conductive
Our electrically conductive coatings can be applied to: anti-static idler rollers, anti-static tanks, bins, chutes, silo coatings, and web grounding rollers for charged webs.
Benefits:
Electrical conductivity.
Best Used For:
These coatings are also used in medical and electronic applications.
View Details -
Electrically Insulated
Our electrically insulated coatings can be applied to: bins, chutes, corona treater rollers, silo coatings, web insulated tanks, and support rollers for electrically charged processes.
Benefits:
Electrical insulation.
Best Used For:
They are also used in medical and electronic coating applications.
View Details -
Electrostatic
Through our electrostatic systems we are able to apply: fluorocarbons, fluoropolymers, silicones, epoxies, and Teflon® industrial coatings.
Benefits:
Polymer applied coatings.
Best Used For:
Wide range of polymer coating applications.
View Details -
Embossing Back Up Rollers
Embossing back up rollers are used to create a nip under pressure, which creates a pattern on substrates.
Benefits:
Elastomeric roller coverings maximize performance.
Best Used For:
Embossing Back Up Rollers
View Details -
Embossing Rollers
Embossing rollers are used to create patterns on substrates.
Benefits:
Multiple surface finish roller bases for high performance and long term wear resistance.
Best Used For:
Embossing Rollers
View Details -
ESA Impression Rollers
Electro Static Assist (ESA) impression rollers are made with synthetic polymers, and are used in gravure printing.
Benefits:
Formulate our compounds to your voltage.
Best Used For:
ESA Impression Rollers
View Details -
ETL Conductor Rollers
Electrolytic tinplate lines (ETL) conductor rollers need to be resistant to corrosion, abrasion, and arc-induced pitting.
Benefits:
We offer wear-resistant solutions.
Best Used For:
ETL Conductor Rollers
View Details -
Expandable sleeves
Expandable sleeves are used in various markets.
Benefits:
Sleeves have elastomeric coverings, solving issues with increased cooling and reduced static build-up.
Best Used For:
A wide variety of industries.
View Details -
Expander Rollers
Expander rollers are used to expand the web by eliminating wrinkles. We offer various web spreading rollers including: bowed, crowned, concaved, and more.
Benefits:
Used to expand the web by eliminating wrinkles.
Best Used For:
Bowed roll and stretch roll applications.
View Details -
Extrusion Equipment
Extrusion equipment is coated with abrasion-resistant and high-release coatings to address issues faced in the various industries this equipment is used in.
Benefits:
Abrasion-resistant and high-release coatings
Best Used For:
A wide variety of industries.
View Details -
Fabric Cutter Tables
We offer coating solutions for fabric cutter tables to provide easier clean ability and low friction when in contact with green rubber during your application.
Benefits:
Easier clean ability and low friction
Best Used For:
Tire and rubber manufacturing process
View Details -
Fan Blades
Gas mixed with fine particles can cause wear or unbalance when they stick to fan blades.
Benefits:
Apply protective coatings to prevent wear and improve self-cleaning.
Best Used For:
A wide variety of industries.
View Details -
Felt Rollers
Felt rollers are used to support and guide felt, but often experience contamination.
Benefits:
Our wear-resistant and release coatings protect felt rollers from contamination and increase run-time.
Best Used For:
Felt Rollers
View Details -
Film Conditioning Rollers
Film conditioning rollers are used for stretching, medium density overlays, and changing properties.
Benefits:
Film stretching without marking.
Best Used For:
These rollers are utilized primarily within the film industry.
View Details -
Fingers
Fingers are flat stock that separates product from each other.
Benefits:
Apply low-friction wear-resistant coatings to slow down ink build-up and make cleaning easier.
Best Used For:
Used in the printing industry.
View Details -
Flame Treating Back Up Rollers
Flame treating back up rollers are manufactured with corrosion and heat-resistant coatings as protection from the high temperatures during flame treating.
Benefits:
Longer service life in high temperatures.
Best Used For:
Flame Treating Back Up Rollers
View Details -
Flattening Rollers
Flattening or Leveler rollers require high strength and durability as they are used in the level or “flattening” of steel or other hard metal or cement/asphalt surfaces.
Benefits:
Longer service life.
Best Used For:
Flattening Rollers
View Details -
Fluidizing Beds
We offer coating solutions that provide wear-resistant, low-friction, non-stick surfaces for fluidizing beds, which deal with difficult to handle materials.
Benefits:
Wear-resistant, low-friction, non-stick surfaces with difficult to handle materials.
Best Used For:
We offer coating solutions that provide wear-resistant, low-friction, non-stick surfaces for fluidizing beds, which deal with difficult to handle materials.
View Details -
Fly Rollers
Fly rollers are used to minimize the draw and pull differences between roller surfaces and paper substrates.
Benefits:
Maximize machine operation.
Best Used For:
These rollers are utilized in the paper industry.
View Details -
Foam Rollers
Foam rollers are manufactured from cellular material and used in a wide variety of applications and industries.
Benefits:
The "soft" core is supported by "tough" shell for improved wear resistance.
Best Used For:
Bump and splicing roll positions.
View Details -
Folding Horn
We coat folding horns with durable, wear-resistant, low-friction coatings which increases production throughput and less rejects during the converting process.
Benefits:
Increases production throughput and less rejects during the converting process.
Best Used For:
A wide variety of high temperature applications.
View Details -
Folding Rails
We coat folding rails with durable, wear-resistant, low-friction coatings which increases production throughput and less rejects during the converting process.
Benefits:
Increases production throughput and less rejects during the converting process.
Best Used For:
A wide range of converting processess.
View Details -
Forming Rollers
Forming rollers including: inking, fountain, and dampening rollers directly contact the printing press plate.
Benefits:
Maximize printing performance.
Best Used For:
These rollers are used in the printing industry.
View Details -
FT-IR Spectrophotometric Analysis
FT-IR spectrophotometric analysis is one of the services we offer as part of our analytical property testing.
Benefits:
This is used to understand material composition and peformance characteristics so that the optimal material and finish recommendation can be provided for a given application.
Best Used For:
Wide range of problem solving applications and analysis.
View Details -
Furnace Rollers
Furnace rollers are used to support webs and coils as they travel through ovens.
Benefits:
Products able to operate in temperatures over 600 F.
Best Used For:
Furnace Rollers
View Details -
Glue Applicator
Coating glue applicators allows for easier cleanability during normal maintenance.
Benefits:
Easier cleanability
Best Used For:
A wide range of converting processess.
View Details -
Glue Rollers
Coating glue applicator rollers allows for easier cleanability during normal maintenance.
Benefits:
We have various coatings to match a solution to your glue or adhesive. Plasma Coatings 11,000 Series is a good choice.
Best Used For:
Glue Rollers
View Details
Showing 91–120 of 420 results