3D Printed Parts
Our coatings can be applied to 3D printed parts depending on the need or requirement. This includes plastic, composite and metal parts.
Benefits:
We manufacture a variety of wear-resistant, release, and conductivity coatings used on 3D printed parts.
Best Used For:
Surface enhancement on 3D printed parts.
View DetailsActuator Shafts
Actuator shafts are either manfuactured new or refurbished back original dimensions. Often these shafts are coated with corrosions or wear resistant coatings.
Benefits:
Corrosions or wear resistant coatings.
Best Used For:
A wide variety of industries.
View DetailsAdhesive Pans
Adhesive pans are used to catch excess adhesive during manufacturing.
Benefits:
Coatings designed to improve pan cleanabilty and extend the life.
Best Used For:
A wide variety of industries.
View DetailsAir Bars
Air bars are used to control alignment and directional change of substrates.
Benefits:
Coatings improve performance, eliminate build-up, and extend their life span.
Best Used For:
A wide variety of industries.
View DetailsAir Shafts
Air shafts are used in processing for winding and unwinding substrates.
Benefits:
Apply high friction coatings to reduce slippage and increase performance.
Best Used For:
A wide variety of industries.
View DetailsAirless Spray
Airless spray is one of our application techniques for applying several different type of coatings.
Benefits:
Polymer applied coatings.
Best Used For:
Wide range of polymer coating applications.
View DetailsAnodizing
Anodizing is an electrochemical process that converts the metal surface into a decorative, durable, corrosion-resistant, anodic oxide finish.
Benefits:
Aluminum is ideally suited to anodizing, although other nonferrous metals, such as magnesium and titanium, also can be anodized.
Best Used For:
We provide anodizing to a wide variety of parts and is one of the various services that we offer.
View DetailsBearing Surfaces
We coat bearing surfaces with wear-resistant coatings in order to have longer run-times per component and protection from high pressures and rough environments.
Benefits:
Extend service life.
Best Used For:
A wide variety of industries.
View DetailsBin
Bins are great storage solutions, prevent wear, and provide easy cleanability.
Benefits:
We offer numerous coatings designed to protect bins during various applications.
Best Used For:
A wide variety of industries.
View DetailsChrome Plating
Standard Chrome plating for new cores as well as re-chroming of used cores.
Benefits:
Corrosion protection and other key surface protection properties
Best Used For:
Heat transfer and chill rolls; other surfaces requiring corrosion protection.
View DetailsChrome Plus +
Chrome Plus is a environmentally friendly carbide coating replacement for Chrome. With equivalent price, performance, surface finish and thermal transfer properties.
Benefits:
Green replacement for Chrome. A scratch resistant and repair capable coating for use in a wide variety of applications.
Best Used For:
Heat transfer and chill rolls and other metals surfaces.
View DetailsChute
We apply non-stick, low-friction, and anti-static coatings to chutes, which improves flow and down-time without the need of vibrators or air cannons.
Benefits:
Improves flow and down-time without the need of vibrators or air cannons.
Best Used For:
A wide variety of industries.
View DetailsCombustion Wire Metallizing
In this process, various metal wire is fed into an oxygen-acetylene gas mixture. It is then in a molten state and sprayed onto the part being processed.
Benefits:
This most basic of coating techniques is limited by maximum temperature attainable and the universe of materials that can be set.
Best Used For:
Utilized to apply metal based coatings.
View DetailsConveyors
Roller conveyors are used when shrink-wrap is needed.
Benefits:
We manufacture cores with durable, dual composite, non-stick coatings making it safe to use scrapers.
Best Used For:
A wide variety of industries.
View DetailsCorrosion Protection
We have a wide range of coating options to help address corrosion. Pptions include the application of thermally sprayed metals and polymers or a combination of the two technologies.
Benefits:
In many instances, our coatings can address the corrosive problem while providing secondary benefits such as release or improved surface hardness promoting erosion resistance.
Best Used For:
A wide range of corrosion protection applications.
View DetailsDiverter Plates
We apply engineered coatings to diverter plates during manufacturing for easy cleanability.
Benefits:
Easy cleanability.
Best Used For:
Diverter plates are utilized within the printing industry.
View DetailsDiverter Wedge
We apply engineered coatings to diverter wedges during manufacturing for easy cleanability. Diverter wedges are utilized within the printing industry.
Benefits:
Easy cleanability.
Best Used For:
Diverter wedges are utilized within the printing industry.
View DetailsDoctor Chamber
Doctor chambers are used to hold doctor blades, which control the metering of ink being transferred.
Benefits:
Coatings act as an ink repellent for easy cleaning.
Best Used For:
A wide variety of industries.
View DetailsDryer Drums
We coat dryer drums with durable, speciality formulated non-stick surfaces.
Benefits:
Allows dryer drums to run at higher speeds, with less sheet breaks and contamination or build up issues.
Best Used For:
Dryer Drums
View DetailsElectric Arc
This process uses materials in wire form, but the heat source is the arcing of two electrically conductive wires. Material is melted and propelled on the part at a greater velocity than metallizing.
Benefits:
Higher temperatures allow for an increased source of base materials, faster rates of deposition, and improved bond and coating density.
Best Used For:
Utilized to apply metal based coatings.
View DetailsElectrically Conductive
Our electrically conductive coatings can be applied to: anti-static idler rollers, anti-static tanks, bins, chutes, silo coatings, and web grounding rollers for charged webs.
Benefits:
Electrical conductivity.
Best Used For:
These coatings are also used in medical and electronic applications.
View DetailsElectrically Insulated
Our electrically insulated coatings can be applied to: bins, chutes, corona treater rollers, silo coatings, web insulated tanks, and support rollers for electrically charged processes.
Benefits:
Electrical insulation.
Best Used For:
They are also used in medical and electronic coating applications.
View DetailsElectrostatic
Through our electrostatic systems we are able to apply: fluorocarbons, fluoropolymers, silicones, epoxies, and TeflonĀ® industrial coatings.
Benefits:
Polymer applied coatings.
Best Used For:
Wide range of polymer coating applications.
View DetailsExpandable sleeves
Expandable sleeves are used in various markets.
Benefits:
Sleeves have elastomeric coverings, solving issues with increased cooling and reduced static build-up.
Best Used For:
A wide variety of industries.
View DetailsFolding Horn
We coat folding horns with durable, wear-resistant, low-friction coatings which increases production throughput and less rejects during the converting process.
Benefits:
Increases production throughput and less rejects during the converting process.
Best Used For:
A wide variety of high temperature applications.
View DetailsFolding Rails
We coat folding rails with durable, wear-resistant, low-friction coatings which increases production throughput and less rejects during the converting process.
Benefits:
Increases production throughput and less rejects during the converting process.
Best Used For:
A wide range of converting processess.
View DetailsGlue Applicator
Coating glue applicators allows for easier cleanability during normal maintenance.
Benefits:
Easier cleanability
Best Used For:
A wide range of converting processess.
View DetailsGuide Rails
Guide rails are used to control web handling for manufacturing and converting processes.
Benefits:
Coat guide rails to assist in the function of the overall unit.
Best Used For:
A wide range of converting processess.
View DetailsHeat Bars
Heat bars are used in various sealing operations.
Benefits:
Apply non-stick coatings to heat bars to provide more precise, repetitive sealing and easier cleanability.
Best Used For:
A wide range of industries and applications
View DetailsHot Melt
We provide release coatings on a number of parts that are exposed to hot-melt adhesives where “no-stick” and release is needed to improve productivity and clean-up.
Benefits:
No-stick and release is needed to improve productivity and clean-up.
Best Used For:
A wide range of converting processess.
View Details
Showing 1–30 of 91 results