-
Actuator Shafts
Actuator shafts are either manfuactured new or refurbished back original dimensions. Often these shafts are coated with corrosions or wear resistant coatings.
Benefits:
Corrosions or wear resistant coatings.
Best Used For:
A wide variety of industries.
View Details -
Adhesive Pans
Adhesive pans are used to catch excess adhesive during manufacturing.
Benefits:
Coatings designed to improve pan cleanabilty and extend the life.
Best Used For:
A wide variety of industries.
View Details -
Agitator Blades
Agitator blades are used to blend a wide range of materials.
Benefits:
Wear-resistant and non-stick coatings to the blade surfaces to enhance performance.
Best Used For:
A wide variety of industries.
View Details -
Anti-static Tank
Our anti-static tanks are coated with anti-static coatings to prevent static from hindering process flow and causing severe build-up on the tank’s walls.
Benefits:
Improve service life.
Best Used For:
A wide variety of industries.
View Details -
Bearing Surfaces
We coat bearing surfaces with wear-resistant coatings in order to have longer run-times per component and protection from high pressures and rough environments.
Benefits:
Extend service life.
Best Used For:
A wide variety of industries.
View Details -
Bin
Bins are great storage solutions, prevent wear, and provide easy cleanability.
Benefits:
We offer numerous coatings designed to protect bins during various applications.
Best Used For:
A wide variety of industries.
View Details -
Chrome Plating
Standard Chrome plating for new cores as well as re-chroming of used cores.
Benefits:
Corrosion protection and other key surface protection properties
Best Used For:
Heat transfer and chill rolls; other surfaces requiring corrosion protection.
View Details -
Chrome Plus +
Chrome Plus is a environmentally friendly carbide coating replacement for Chrome. With equivalent price, performance, surface finish and thermal transfer properties.
Benefits:
Green replacement for Chrome. A scratch resistant and repair capable coating for use in a wide variety of applications.
Best Used For:
Heat transfer and chill rolls and other metals surfaces.
View Details -
Chute
We apply non-stick, low-friction, and anti-static coatings to chutes, which improves flow and down-time without the need of vibrators or air cannons.
Benefits:
Improves flow and down-time without the need of vibrators or air cannons.
Best Used For:
A wide variety of industries.
View Details -
Combustion Wire Metallizing
In this process, various metal wire is fed into an oxygen-acetylene gas mixture. It is then in a molten state and sprayed onto the part being processed.
Benefits:
This most basic of coating techniques is limited by maximum temperature attainable and the universe of materials that can be set.
Best Used For:
Utilized to apply metal based coatings.
View Details -
Conveyors
Roller conveyors are used when shrink-wrap is needed.
Benefits:
We manufacture cores with durable, dual composite, non-stick coatings making it safe to use scrapers.
Best Used For:
A wide variety of industries.
View Details -
Corrosion Protection
We have a wide range of coating options to help address corrosion. Pptions include the application of thermally sprayed metals and polymers or a combination of the two technologies.
Benefits:
In many instances, our coatings can address the corrosive problem while providing secondary benefits such as release or improved surface hardness promoting erosion resistance.
Best Used For:
A wide range of corrosion protection applications.
View Details -
Dead Plates
Dead plates are used to convey material.
Benefits:
Coating combinations to address issues likes: wear, friction, chemicals, sticking, and more.
Best Used For:
A wide variety of industries.
View Details -
Die Plates
Die plates are used in manufacturing plastic molds.
Benefits:
Durable non-stick coatings for various plastics removing the need to mold non-stick applications.
Best Used For:
A wide variety of industries.
View Details -
Dryer Drums
We coat dryer drums with durable, speciality formulated non-stick surfaces.
Benefits:
Allows dryer drums to run at higher speeds, with less sheet breaks and contamination or build up issues.
Best Used For:
Dryer Drums
View Details -
Ductwork
Ductwork is used to remove corrosive gases and heat from processing.
Benefits:
Engineer specialized composite coatings to combat high temperature corrosion and wear.
Best Used For:
A wide variety of industries.
View Details -
Electric Arc
This process uses materials in wire form, but the heat source is the arcing of two electrically conductive wires. Material is melted and propelled on the part at a greater velocity than metallizing.
Benefits:
Higher temperatures allow for an increased source of base materials, faster rates of deposition, and improved bond and coating density.
Best Used For:
Utilized to apply metal based coatings.
View Details -
Electrically Conductive
Our electrically conductive coatings can be applied to: anti-static idler rollers, anti-static tanks, bins, chutes, silo coatings, and web grounding rollers for charged webs.
Benefits:
Electrical conductivity.
Best Used For:
These coatings are also used in medical and electronic applications.
View Details -
Electrically Insulated
Our electrically insulated coatings can be applied to: bins, chutes, corona treater rollers, silo coatings, web insulated tanks, and support rollers for electrically charged processes.
Benefits:
Electrical insulation.
Best Used For:
They are also used in medical and electronic coating applications.
View Details -
Electrostatic
Through our electrostatic systems we are able to apply: fluorocarbons, fluoropolymers, silicones, epoxies, and Teflon® industrial coatings.
Benefits:
Polymer applied coatings.
Best Used For:
Wide range of polymer coating applications.
View Details -
Expandable sleeves
Expandable sleeves are used in various markets.
Benefits:
Sleeves have elastomeric coverings, solving issues with increased cooling and reduced static build-up.
Best Used For:
A wide variety of industries.
View Details -
Fluidizing Beds
We offer coating solutions that provide wear-resistant, low-friction, non-stick surfaces for fluidizing beds, which deal with difficult to handle materials.
Benefits:
Wear-resistant, low-friction, non-stick surfaces with difficult to handle materials.
Best Used For:
We offer coating solutions that provide wear-resistant, low-friction, non-stick surfaces for fluidizing beds, which deal with difficult to handle materials.
View Details -
Folding Horn
We coat folding horns with durable, wear-resistant, low-friction coatings which increases production throughput and less rejects during the converting process.
Benefits:
Increases production throughput and less rejects during the converting process.
Best Used For:
A wide variety of high temperature applications.
View Details -
Guide Rails
Guide rails are used to control web handling for manufacturing and converting processes.
Benefits:
Coat guide rails to assist in the function of the overall unit.
Best Used For:
A wide range of converting processess.
View Details -
Heat Bars
Heat bars are used in various sealing operations.
Benefits:
Apply non-stick coatings to heat bars to provide more precise, repetitive sealing and easier cleanability.
Best Used For:
A wide range of industries and applications
View Details -
Heated Piping
Heated piping is coated to maintain uniform temperature across the face of a pipe.
Benefits:
Apply patended SmartHeat technology to keep temperatures uniform.
Best Used For:
A wide range of industries and applications
View Details -
Holding Tanks
We engineer and apply a variety of low friction, high release, and easily cleaned coatings for holding tank interiors.
Benefits:
Extend service life.
Best Used For:
A wide range of industries and applications
View Details -
Hot Melt
We provide release coatings on a number of parts that are exposed to hot-melt adhesives where “no-stick” and release is needed to improve productivity and clean-up.
Benefits:
No-stick and release is needed to improve productivity and clean-up.
Best Used For:
A wide range of converting processess.
View Details -
Hot Melt Pans
Hot melt pans are used to collect excess hot melt adhesive during application.
Benefits:
Offer various coatings designed for wear-resistance and easier cleanability.
Best Used For:
A wide range of converting processess.
View Details -
HVOF
In this process metal particles actually travel faster than the speed of sound, generating the best bond strengths, density and hardness of all our processes.
Benefits:
HVOF does not reach temperatures that are attainable with plasma processes so materials such as ceramicsare not processed with this technique.
Best Used For:
Utilized to apply metal based coatings.
View Details
Showing 1–30 of 106 results