-
Actuator Shafts
Actuator shafts are either manfuactured new or refurbished back original dimensions. Often these shafts are coated with corrosions or wear resistant coatings.
Benefits:
Corrosions or wear resistant coatings.
Best Used For:
A wide variety of industries.
View Details -
Adhesive Pans
Adhesive pans are used to catch excess adhesive during manufacturing.
Benefits:
Coatings designed to improve pan cleanabilty and extend the life.
Best Used For:
A wide variety of industries.
View Details -
Air Shafts
Air shafts are used in processing for winding and unwinding substrates.
Benefits:
Apply high friction coatings to reduce slippage and increase performance.
Best Used For:
A wide variety of industries.
View Details -
Anti-static Tank
Our anti-static tanks are coated with anti-static coatings to prevent static from hindering process flow and causing severe build-up on the tank’s walls.
Benefits:
Improve service life.
Best Used For:
A wide variety of industries.
View Details -
Balers
Balers are used to collect reclaim of trimmed product for recycling and disposal.
Benefits:
Coat bailers to combat erosion, contamination, and product build-up.
Best Used For:
A wide variety of industries.
View Details -
Bearing Surfaces
We coat bearing surfaces with wear-resistant coatings in order to have longer run-times per component and protection from high pressures and rough environments.
Benefits:
Extend service life.
Best Used For:
A wide variety of industries.
View Details -
Bin
Bins are great storage solutions, prevent wear, and provide easy cleanability.
Benefits:
We offer numerous coatings designed to protect bins during various applications.
Best Used For:
A wide variety of industries.
View Details -
Boiler Tubes
We apply corrosion and wear resistant-metal and ceramic solutions to boiler tubes to protect their surfaces from hot oxidation and erosion from fine particles.
Benefits:
Extend service life.
Best Used For:
Boilers in a wide variety of process industries.
View Details -
Burners
Burners are used in corrosive and abrasive environments.
Benefits:
Coat burners with a wide range of alloys that address the issues of corrosion and abrasion.
Best Used For:
A wide variety of industries.
View Details -
Chrome Plating
Standard Chrome plating for new cores as well as re-chroming of used cores.
Benefits:
Corrosion protection and other key surface protection properties
Best Used For:
Heat transfer and chill rolls; other surfaces requiring corrosion protection.
View Details -
Chrome Plus +
Chrome Plus is a environmentally friendly carbide coating replacement for Chrome. With equivalent price, performance, surface finish and thermal transfer properties.
Benefits:
Green replacement for Chrome. A scratch resistant and repair capable coating for use in a wide variety of applications.
Best Used For:
Heat transfer and chill rolls and other metals surfaces.
View Details -
Chute
We apply non-stick, low-friction, and anti-static coatings to chutes, which improves flow and down-time without the need of vibrators or air cannons.
Benefits:
Improves flow and down-time without the need of vibrators or air cannons.
Best Used For:
A wide variety of industries.
View Details -
Coal Riffles
Coal Riffles help balance the combustible flow to the burners in coal plants.
Benefits:
Coat coal riffles to protect them from wear on their surfaces and edges.
Best Used For:
Coal industry.
View Details -
Combustion Wire Metallizing
In this process, various metal wire is fed into an oxygen-acetylene gas mixture. It is then in a molten state and sprayed onto the part being processed.
Benefits:
This most basic of coating techniques is limited by maximum temperature attainable and the universe of materials that can be set.
Best Used For:
Utilized to apply metal based coatings.
View Details -
Corrosion Protection
We have a wide range of coating options to help address corrosion. Pptions include the application of thermally sprayed metals and polymers or a combination of the two technologies.
Benefits:
In many instances, our coatings can address the corrosive problem while providing secondary benefits such as release or improved surface hardness promoting erosion resistance.
Best Used For:
A wide range of corrosion protection applications.
View Details -
Ductwork
Ductwork is used to remove corrosive gases and heat from processing.
Benefits:
Engineer specialized composite coatings to combat high temperature corrosion and wear.
Best Used For:
A wide variety of industries.
View Details -
Electric Arc
This process uses materials in wire form, but the heat source is the arcing of two electrically conductive wires. Material is melted and propelled on the part at a greater velocity than metallizing.
Benefits:
Higher temperatures allow for an increased source of base materials, faster rates of deposition, and improved bond and coating density.
Best Used For:
Utilized to apply metal based coatings.
View Details -
Electric Arc Furnace
We engineer and apply coating solutions that significantly increase the life of water-cooled electric arc furnace duct work.
Benefits:
Solutions are applicable on-site
Best Used For:
A wide variety of industries.
View Details -
Electrically Conductive
Our electrically conductive coatings can be applied to: anti-static idler rollers, anti-static tanks, bins, chutes, silo coatings, and web grounding rollers for charged webs.
Benefits:
Electrical conductivity.
Best Used For:
These coatings are also used in medical and electronic applications.
View Details -
Electrically Insulated
Our electrically insulated coatings can be applied to: bins, chutes, corona treater rollers, silo coatings, web insulated tanks, and support rollers for electrically charged processes.
Benefits:
Electrical insulation.
Best Used For:
They are also used in medical and electronic coating applications.
View Details -
Electrostatic
Through our electrostatic systems we are able to apply: fluorocarbons, fluoropolymers, silicones, epoxies, and Teflon® industrial coatings.
Benefits:
Polymer applied coatings.
Best Used For:
Wide range of polymer coating applications.
View Details -
Fan Blades
Gas mixed with fine particles can cause wear or unbalance when they stick to fan blades.
Benefits:
Apply protective coatings to prevent wear and improve self-cleaning.
Best Used For:
A wide variety of industries.
View Details -
Heat Exchanger
Heat exchangers are used in corrosive and abrasive environments.
Benefits:
Coat them with a wide range of alloys that address the issues of corrosion and abrasion.
Best Used For:
A wide range of industries and applications
View Details -
HVOF
In this process metal particles actually travel faster than the speed of sound, generating the best bond strengths, density and hardness of all our processes.
Benefits:
HVOF does not reach temperatures that are attainable with plasma processes so materials such as ceramicsare not processed with this technique.
Best Used For:
Utilized to apply metal based coatings.
View Details -
Laser Cladding
Laser cladding is an additive manufacturing process that utilizes a laser to metallurgically bond performance coatings to a product’s base material.
Benefits:
The process uses the laser to create a melt pool of the base material. The coating material is introduced into this melt pool in either powder or wire form.
Best Used For:
A wide range of cladding applications; including small footprint applications.
View Details -
Liquid Dispersion
Liquid dispersion is a polymer coating process technique used in a wide variety of applications.
Benefits:
Polymer applied coatings.
Best Used For:
Wide range of polymer coating applications.
View Details -
Low Friction
Reduce the cleanup and buildup of such materials as starches, paints, adhesives, latex, rubber, food, paper, ice, sugar, resins, tapes, inks.
Benefits:
Extremely wear resistant and long lasting.
Best Used For:
Hard base onto your part and then impregnate one of our Low COF release agents into that coating.
View Details -
Machine Frame
We deisgn, engineer and apply coatings to machine frames for wear and corrosion resistance to extend their life spans.
Benefits:
Service is provided on-site.
Best Used For:
A wide range of industries and applications
View Details -
Nickel Plating
Electroless Nickel plating offers some advantages over chrome plating. It has a better resistance to corrosion with relatively thinner coatings than chrome.
Benefits:
Electroless Nickel plating in the as-plated condition has a hardness of approximately 50Rc. It can be heat treated by baking to a hardness of approximately 70Rc.
Best Used For:
Electroless Nickel plating can be applied to aluminum and steel.
View Details -
Non & Conductive Coatings
Conductive and non-conductive coatings are used promote or limit the flow of heat or electrical current into or away from the object that is coated.
Benefits:
Wide variety of metal, metal alloy, carbide matrix, ceramic, and polymer coatings available with these properties as well as combination coatings composed of thermal spray and polymer coatings.
Best Used For:
Conductive and non-conductive surface properties.
View Details
Showing 1–30 of 53 results