3D Printed Parts
Our coatings can be applied to 3D printed parts depending on the need or requirement. This includes plastic, composite and metal parts.
Benefits:
We manufacture a variety of wear-resistant, release, and conductivity coatings used on 3D printed parts.
Best Used For:
Surface enhancement on 3D printed parts.
View Details
Actuator Shafts
Actuator shafts are either manfuactured new or refurbished back original dimensions. Often these shafts are coated with corrosions or wear resistant coatings.
Benefits:
Corrosions or wear resistant coatings.
Best Used For:
A wide variety of industries.
View Details
Adhesive Pans
Adhesive pans are used to catch excess adhesive during manufacturing.
Benefits:
Coatings designed to improve pan cleanabilty and extend the life.
Best Used For:
A wide variety of industries.
View Details
Air Bars
Air bars are used to control alignment and directional change of substrates.
Benefits:
Coatings improve performance, eliminate build-up, and extend their life span.
Best Used For:
A wide variety of industries.
View Details
Air Shafts
Air shafts are used in processing for winding and unwinding substrates.
Benefits:
Apply high friction coatings to reduce slippage and increase performance.
Best Used For:
A wide variety of industries.
View Details
Airless Spray
Airless spray is one of our application techniques for applying several different type of coatings.
Benefits:
Polymer applied coatings.
Best Used For:
Wide range of polymer coating applications.
View Details
Anodizing
Anodizing is an electrochemical process that converts the metal surface into a decorative, durable, corrosion-resistant, anodic oxide finish.
Benefits:
Aluminum is ideally suited to anodizing, although other nonferrous metals, such as magnesium and titanium, also can be anodized.
Best Used For:
We provide anodizing to a wide variety of parts and is one of the various services that we offer.
View Details
Bearing Surfaces
We coat bearing surfaces with wear-resistant coatings in order to have longer run-times per component and protection from high pressures and rough environments.
Benefits:
Extend service life.
Best Used For:
A wide variety of industries.
View Details
Bin
Bins are great storage solutions, prevent wear, and provide easy cleanability.
Benefits:
We offer numerous coatings designed to protect bins during various applications.
Best Used For:
A wide variety of industries.
View Details
Chrome Plating
Standard Chrome plating for new cores as well as re-chroming of used cores.
Benefits:
Corrosion protection and other key surface protection properties
Best Used For:
Heat transfer and chill rolls; other surfaces requiring corrosion protection.
View Details
Chrome Plus +
Chrome Plus is a environmentally friendly carbide coating replacement for Chrome. With equivalent price, performance, surface finish and thermal transfer properties.
Benefits:
Green replacement for Chrome. A scratch resistant and repair capable coating for use in a wide variety of applications.
Best Used For:
Heat transfer and chill rolls and other metals surfaces.
View Details
Chute
We apply non-stick, low-friction, and anti-static coatings to chutes, which improves flow and down-time without the need of vibrators or air cannons.
Benefits:
Improves flow and down-time without the need of vibrators or air cannons.
Best Used For:
A wide variety of industries.
View Details
Combustion Wire Metallizing
In this process, various metal wire is fed into an oxygen-acetylene gas mixture. It is then in a molten state and sprayed onto the part being processed.
Benefits:
This most basic of coating techniques is limited by maximum temperature attainable and the universe of materials that can be set.
Best Used For:
Utilized to apply metal based coatings.
View Details
Corrosion Protection
We have a wide range of coating options to help address corrosion. Pptions include the application of thermally sprayed metals and polymers or a combination of the two technologies.
Benefits:
In many instances, our coatings can address the corrosive problem while providing secondary benefits such as release or improved surface hardness promoting erosion resistance.
Best Used For:
A wide range of corrosion protection applications.
View Details
Cutter Tables
Cutter tables are often used to cut woven material to size.
Benefits:
Coat cutter tables with durable, dual composite, non-stick coatings to resist de-lamination.
Best Used For:
Non-woven manufacturing.
View Details
Dryer Drums
We coat dryer drums with durable, speciality formulated non-stick surfaces.
Benefits:
Allows dryer drums to run at higher speeds, with less sheet breaks and contamination or build up issues.
Best Used For:
Dryer Drums
View Details
Ductwork
Ductwork is used to remove corrosive gases and heat from processing.
Benefits:
Engineer specialized composite coatings to combat high temperature corrosion and wear.
Best Used For:
A wide variety of industries.
View Details
Electric Arc
This process uses materials in wire form, but the heat source is the arcing of two electrically conductive wires. Material is melted and propelled on the part at a greater velocity than metallizing.
Benefits:
Higher temperatures allow for an increased source of base materials, faster rates of deposition, and improved bond and coating density.
Best Used For:
Utilized to apply metal based coatings.
View Details
Electrically Conductive
Our electrically conductive coatings can be applied to: anti-static idler rollers, anti-static tanks, bins, chutes, silo coatings, and web grounding rollers for charged webs.
Benefits:
Electrical conductivity.
Best Used For:
These coatings are also used in medical and electronic applications.
View Details
Electrically Insulated
Our electrically insulated coatings can be applied to: bins, chutes, corona treater rollers, silo coatings, web insulated tanks, and support rollers for electrically charged processes.
Benefits:
Electrical insulation.
Best Used For:
They are also used in medical and electronic coating applications.
View Details-
Electrostatic
Through our electrostatic systems we are able to apply: fluorocarbons, fluoropolymers, silicones, epoxies, and Teflon® industrial coatings.
Benefits:
Polymer applied coatings.
Best Used For:
Wide range of polymer coating applications.
View Details 
Expandable sleeves
Expandable sleeves are used in various markets.
Benefits:
Sleeves have elastomeric coverings, solving issues with increased cooling and reduced static build-up.
Best Used For:
A wide variety of industries.
View Details
Fan Blades
Gas mixed with fine particles can cause wear or unbalance when they stick to fan blades.
Benefits:
Apply protective coatings to prevent wear and improve self-cleaning.
Best Used For:
A wide variety of industries.
View Details
Fluidizing Beds
We offer coating solutions that provide wear-resistant, low-friction, non-stick surfaces for fluidizing beds, which deal with difficult to handle materials.
Benefits:
Wear-resistant, low-friction, non-stick surfaces with difficult to handle materials.
Best Used For:
We offer coating solutions that provide wear-resistant, low-friction, non-stick surfaces for fluidizing beds, which deal with difficult to handle materials.
View Details
Glue Applicator
Coating glue applicators allows for easier cleanability during normal maintenance.
Benefits:
Easier cleanability
Best Used For:
A wide range of converting processess.
View Details-
Heated Piping
Heated piping is coated to maintain uniform temperature across the face of a pipe.
Benefits:
Apply patended SmartHeat technology to keep temperatures uniform.
Best Used For:
A wide range of industries and applications
View Details 
Hot Melt
We provide release coatings on a number of parts that are exposed to hot-melt adhesives where “no-stick” and release is needed to improve productivity and clean-up.
Benefits:
No-stick and release is needed to improve productivity and clean-up.
Best Used For:
A wide range of converting processess.
View Details-
Hot Melt Pans
Hot melt pans are used to collect excess hot melt adhesive during application.
Benefits:
Offer various coatings designed for wear-resistance and easier cleanability.
Best Used For:
A wide range of converting processess.
View Details 
HVOF
In this process metal particles actually travel faster than the speed of sound, generating the best bond strengths, density and hardness of all our processes.
Benefits:
HVOF does not reach temperatures that are attainable with plasma processes so materials such as ceramicsare not processed with this technique.
Best Used For:
Utilized to apply metal based coatings.
View Details
Laser Cladding
Laser cladding is an additive manufacturing process that utilizes a laser to metallurgically bond performance coatings to a product’s base material.
Benefits:
The process uses the laser to create a melt pool of the base material. The coating material is introduced into this melt pool in either powder or wire form.
Best Used For:
A wide range of cladding applications; including small footprint applications.
View Details
Showing 1–30 of 97 results