-
Dryer Felt Rollers
We apply wear-resistant and non-stick coatings to dryer felt rollers either in-house or on-site.
Benefits:
Reduces build-up and cavitation caused by pitting.
Best Used For:
Dryer Felt Rollers
View Details -
DSB Sheet Rings
These components are used in the tire and rubber manufacturing process.
Benefits:
Rings are coated with release (non-stick) and wear resistance coatings.
Best Used For:
Tire and rubber manufacturing process
View Details -
Ductwork
Ductwork is used to remove corrosive gases and heat from processing.
Benefits:
Engineer specialized composite coatings to combat high temperature corrosion and wear.
Best Used For:
A wide variety of industries.
View Details -
DuraShell™ Chill and Heat Transfer Rollers
DuraShell™ Chill and Heat Transfer Rolls provide uniform temperature control. Designed for best performance on high load applications (extruded sheet).
Benefits:
Industry standard and trademarked, DuraShell™ chill and heat transfer rolls that are built to last.
Best Used For:
Heat transfer and chill rolls on high load applications (extruded sheet).
View Details -
Durometer Measure
Durometer is the international standard used for measurement of rubber hardness in the roller industry and also refers to the instrument itself.
Benefits:
Measure and control roller hardness.
Best Used For:
This is a standard specification we define some products and servics with, providing documentation to our customers.
View Details -
Dynamic Abrasion Testing
Dynamic abrasion testing is one of the services we offer as part of our dynamic property testing.
Benefits:
This test is used in the pursuit of designing longer-lasting coverings and coatings.
Best Used For:
This test is used to determine resistance to wear of a particular coating or covering.
View Details -
Dynamic Property Testing
These tests are utilized to understand a coating or coverings response to pressure, heat and wear.
Benefits:
The tests include: Static Release Dynamic Abrasion Testing Pilot Testing Hysteresis (Heat Buildup) Testing
Best Used For:
Wide range of problem solving applications and analysis.
View Details -
EGL Conductor Rollers
EGL conductor rollers are used in electro galvanizing lines and need to be corrosion and abrasion-resistant.
Benefits:
Solution to reduce wear.
Best Used For:
EGL Conductor Rollers
View Details -
Electric Arc
This process uses materials in wire form, but the heat source is the arcing of two electrically conductive wires. Material is melted and propelled on the part at a greater velocity than metallizing.
Benefits:
Higher temperatures allow for an increased source of base materials, faster rates of deposition, and improved bond and coating density.
Best Used For:
Utilized to apply metal based coatings.
View Details -
Electric Arc Furnace
We engineer and apply coating solutions that significantly increase the life of water-cooled electric arc furnace duct work.
Benefits:
Solutions are applicable on-site
Best Used For:
A wide variety of industries.
View Details -
Electrically Conductive
Our electrically conductive coatings can be applied to: anti-static idler rollers, anti-static tanks, bins, chutes, silo coatings, and web grounding rollers for charged webs.
Benefits:
Electrical conductivity.
Best Used For:
These coatings are also used in medical and electronic applications.
View Details -
Electrically Insulated
Our electrically insulated coatings can be applied to: bins, chutes, corona treater rollers, silo coatings, web insulated tanks, and support rollers for electrically charged processes.
Benefits:
Electrical insulation.
Best Used For:
They are also used in medical and electronic coating applications.
View Details -
Electrostatic
Through our electrostatic systems we are able to apply: fluorocarbons, fluoropolymers, silicones, epoxies, and Teflon® industrial coatings.
Benefits:
Polymer applied coatings.
Best Used For:
Wide range of polymer coating applications.
View Details -
Embossing Back Up Rollers
Embossing back up rollers are used to create a nip under pressure, which creates a pattern on substrates.
Benefits:
Elastomeric roller coverings maximize performance.
Best Used For:
Embossing Back Up Rollers
View Details -
Embossing Rollers
Embossing rollers are used to create patterns on substrates.
Benefits:
Multiple surface finish roller bases for high performance and long term wear resistance.
Best Used For:
Embossing Rollers
View Details -
EPDM and Butyl Rubbers
EPDM and butyl rubbers are synthetic polymers known for their heat, ozone, and weather resistance.
Benefits:
Special blended formulations enable users to customize the solution to the engineering needs.
Best Used For:
We offer coatings with a temperature resistance up to 350 F.
View Details -
EquaTherm® Chill and Heat Transfer Rollers
EquaTherm® chill rolls offer ultimate performance in heat-transfer rollers, with an efficient design and energy savings.
Benefits:
This low-load design substitutes spiral Teflon® seals to maximize heat transfer capacity and uniformity for application.
Best Used For:
Heat transfer and chill rolls on lower load applications such as cast film, laminating and coating.
View Details -
ESA Impression Rollers
Electro Static Assist (ESA) impression rollers are made with synthetic polymers, and are used in gravure printing.
Benefits:
Formulate our compounds to your voltage.
Best Used For:
ESA Impression Rollers
View Details -
ETL Conductor Rollers
Electrolytic tinplate lines (ETL) conductor rollers need to be resistant to corrosion, abrasion, and arc-induced pitting.
Benefits:
We offer wear-resistant solutions.
Best Used For:
ETL Conductor Rollers
View Details -
Excelnip series
Excelnip series is an extremely effective and durable elastomeric nip roller for use in demanding cast extrusion/embossing applications. Provides superior cosmetic free/non-transferring surface.
Benefits:
Longer service life in high temperature up to 400°F (450°F intermittently) and high ozone environments. Cosmetic free/non-transferring surface. Excellent heat and oxidation resistance.
Best Used For:
Excelnip rollers are high-release elastomeric nip rollers for use in cast extrusion and coating applications. It provides the best imperfection-free/non-transferring surfaces in the industry.
View Details -
Expandable sleeves
Expandable sleeves are used in various markets.
Benefits:
Sleeves have elastomeric coverings, solving issues with increased cooling and reduced static build-up.
Best Used For:
A wide variety of industries.
View Details -
Expander Rollers
Expander rollers are used to expand the web by eliminating wrinkles. We offer various web spreading rollers including: bowed, crowned, concaved, and more.
Benefits:
Used to expand the web by eliminating wrinkles.
Best Used For:
Bowed roll and stretch roll applications.
View Details -
Extrusion Equipment
Extrusion equipment is coated with abrasion-resistant and high-release coatings to address issues faced in the various industries this equipment is used in.
Benefits:
Abrasion-resistant and high-release coatings
Best Used For:
A wide variety of industries.
View Details -
Fabric Cutter Tables
We offer coating solutions for fabric cutter tables to provide easier clean ability and low friction when in contact with green rubber during your application.
Benefits:
Easier clean ability and low friction
Best Used For:
Tire and rubber manufacturing process
View Details -
Fan Blades
Gas mixed with fine particles can cause wear or unbalance when they stick to fan blades.
Benefits:
Apply protective coatings to prevent wear and improve self-cleaning.
Best Used For:
A wide variety of industries.
View Details -
Felt Rollers
Felt rollers are used to support and guide felt, but often experience contamination.
Benefits:
Our wear-resistant and release coatings protect felt rollers from contamination and increase run-time.
Best Used For:
Felt Rollers
View Details -
Film Conditioning Rollers
Film conditioning rollers are used for stretching, medium density overlays, and changing properties.
Benefits:
Film stretching without marking.
Best Used For:
These rollers are utilized primarily within the film industry.
View Details -
Fingers
Fingers are flat stock that separates product from each other.
Benefits:
Apply low-friction wear-resistant coatings to slow down ink build-up and make cleaning easier.
Best Used For:
Used in the printing industry.
View Details -
Flame Treating Back Up Rollers
Flame treating back up rollers are manufactured with corrosion and heat-resistant coatings as protection from the high temperatures during flame treating.
Benefits:
Longer service life in high temperatures.
Best Used For:
Flame Treating Back Up Rollers
View Details -
Flattening Rollers
Flattening or Leveler rollers require high strength and durability as they are used in the level or “flattening” of steel or other hard metal or cement/asphalt surfaces.
Benefits:
Longer service life.
Best Used For:
Flattening Rollers
View Details
Showing 91–120 of 435 results