Food & Beverage

Dead Plates

Dead plates are used to convey material.

Benefits: 

Coating combinations to address issues likes: wear, friction, chemicals, sticking, and more.

Best Used For: 

A wide variety of industries.

Die Plates

Die plates are used in manufacturing plastic molds.

Benefits: 

Durable non-stick coatings for various plastics removing the need to mold non-stick applications.

Best Used For: 

A wide variety of industries.

Dryer Drums

We coat dryer drums with durable, speciality formulated non-stick surfaces.

Benefits: 

Allows dryer drums to run at higher speeds, with less sheet breaks and contamination or build up issues.

Best Used For: 

Dryer Drums

Ductwork

Ductwork is used to remove corrosive gases and heat from processing.

Benefits: 

Engineer specialized composite coatings to combat high temperature corrosion and wear.

Best Used For: 

A wide variety of industries.

Dynamic Abrasion Testing

Dynamic abrasion testing is one of the services we offer as part of our dynamic property testing.

Benefits: 

This test is used in the pursuit of designing longer-lasting coverings and coatings.

Best Used For: 

This test is used to determine resistance to wear of a particular coating or covering.

Dynamic Property Testing

These tests are utilized to understand a coating or coverings response to pressure, heat and wear.

Benefits: 

The tests include: Static Release Dynamic Abrasion Testing Pilot Testing Hysteresis (Heat Buildup) Testing

Best Used For: 

Wide range of problem solving applications and analysis.

Electric Arc

This process uses materials in wire form, but the heat source is the arcing of two electrically conductive wires. Material is melted and propelled on the part at a greater velocity than metallizing.

Benefits: 

Higher temperatures allow for an increased source of base materials, faster rates of deposition, and improved bond and coating density.

Best Used For: 

Utilized to apply metal based coatings.

Electrically Conductive

Our electrically conductive coatings can be applied to: anti-static idler rollers, anti-static tanks, bins, chutes, silo coatings, and web grounding rollers for charged webs.

Benefits: 

Electrical conductivity.

Best Used For: 

These coatings are also used in medical and electronic applications.

Electrically Insulated

Our electrically insulated coatings can be applied to: bins, chutes, corona treater rollers, silo coatings, web insulated tanks, and support rollers for electrically charged processes.

Benefits: 

Electrical insulation.

Best Used For: 

They are also used in medical and electronic coating applications.

Electrostatic

Through our electrostatic systems we are able to apply: fluorocarbons, fluoropolymers, silicones, epoxies, and Teflon® industrial coatings.

Benefits: 

Polymer applied coatings.

Best Used For: 

Wide range of polymer coating applications.

Embossing Back Up Rollers

Embossing back up rollers are used to create a nip under pressure, which creates a pattern on substrates.

Benefits: 

Elastomeric roller coverings maximize performance.

Best Used For: 

Embossing Back Up Rollers

Embossing Rollers

Embossing rollers are used to create patterns on substrates.

Benefits: 

Multiple surface finish roller bases for high performance and long term wear resistance.

Best Used For: 

Embossing Rollers

Expandable sleeves

Expandable sleeves are used in various markets.

Benefits: 

Sleeves have elastomeric coverings, solving issues with increased cooling and reduced static build-up.

Best Used For: 

A wide variety of industries.

Fluidizing Beds

We offer coating solutions that provide wear-resistant, low-friction, non-stick surfaces for fluidizing beds, which deal with difficult to handle materials.

Benefits: 

Wear-resistant, low-friction, non-stick surfaces with difficult to handle materials.

Best Used For: 

We offer coating solutions that provide wear-resistant, low-friction, non-stick surfaces for fluidizing beds, which deal with difficult to handle materials.

Folding Horn

We coat folding horns with durable, wear-resistant, low-friction coatings which increases production throughput and less rejects during the converting process.

Benefits: 

Increases production throughput and less rejects during the converting process.

Best Used For: 

A wide variety of high temperature applications.

FT-IR Spectrophotometric Analysis

FT-IR spectrophotometric analysis is one of the services we offer as part of our analytical property testing.

Benefits: 

This is used to understand material composition and peformance characteristics so that the optimal material and finish recommendation can be provided for a given application.

Best Used For: 

Wide range of problem solving applications and analysis.

Furnace Rollers

Furnace rollers are used to support webs and coils as they travel through ovens.

Benefits: 

Products able to operate in temperatures over 600 F.

Best Used For: 

Furnace Rollers

Guide Rails

Guide rails are used to control web handling for manufacturing and converting processes.

Benefits: 

Coat guide rails to assist in the function of the overall unit.

Best Used For: 

A wide range of converting processess.

Hardness Testing

Harness testing is one of the services we offer as part of our physical property testing.

Benefits: 

This type of testing helps us better understand current state and correlate the data to recommendations on better performing materials for the application.

Best Used For: 

Wide range of problem solving applications and analysis.

Heat Bars

Heat bars are used in various sealing operations.

Benefits: 

Apply non-stick coatings to heat bars to provide more precise, repetitive sealing and easier cleanability.

Best Used For: 

A wide range of industries and applications

Heat Treating

Heat treating is a group of industrial and metalworking processes used to alter the physical, and sometimes chemical, properties of a material.

Benefits: 

Alter physical properaties of a base metal.

Best Used For: 

Often times products are specified with a heat treating requirement and the company provides this service per the specification required.

Heated Piping

Heated piping is coated to maintain uniform temperature across the face of a pipe.

Benefits: 

Apply patended SmartHeat technology to keep temperatures uniform.

Best Used For: 

A wide range of industries and applications

Holding Tanks

We engineer and apply a variety of low friction, high release, and easily cleaned coatings for holding tank interiors.

Benefits: 

Extend service life.

Best Used For: 

A wide range of industries and applications

Hot Melt

We provide release coatings on a number of parts that are exposed to hot-melt adhesives where “no-stick” and release is needed to improve productivity and clean-up.

Benefits: 

No-stick and release is needed to improve productivity and clean-up.

Best Used For: 

A wide range of converting processess.

Hot Melt Pans

Hot melt pans are used to collect excess hot melt adhesive during application.

Benefits: 

Offer various coatings designed for wear-resistance and easier cleanability.

Best Used For: 

A wide range of converting processess.

HVOF

In this process metal particles actually travel faster than the speed of sound, generating the best bond strengths, density and hardness of all our processes.

Benefits: 

HVOF does not reach temperatures that are attainable with plasma processes so materials such as ceramicsare not processed with this technique.

Best Used For: 

Utilized to apply metal based coatings.

ID Grinding

We perform Internal Diameter Grinding on complex parts.

Benefits: 

Smooth internal diameter surface finish.

Best Used For: 

A wide variety of applications.

Impellors

Impellors

Ink Tanks

Ink tanks are used to contain ink that is to be applied onto substrates.

Benefits: 

Offer various coatings designed to significantly ease the cleanability of the tanks.

Best Used For: 

Used in the printing industry.

Knurled and Ground finishes

Available in a variety of aluminum and steel, our knurled and ground finishes are available for the manufacturing and repair of custom converting rollers.

Benefits: 

Custom finish solutions.

Best Used For: 

A wide variety of applications.