-
Ductwork
Ductwork is used to remove corrosive gases and heat from processing.
Benefits:
Engineer specialized composite coatings to combat high temperature corrosion and wear.
Best Used For:
A wide variety of industries.
View Details -
Dynamic Abrasion Testing
Dynamic abrasion testing is one of the services we offer as part of our dynamic property testing.
Benefits:
This test is used in the pursuit of designing longer-lasting coverings and coatings.
Best Used For:
This test is used to determine resistance to wear of a particular coating or covering.
View Details -
Dynamic Property Testing
These tests are utilized to understand a coating or coverings response to pressure, heat and wear.
Benefits:
The tests include: Static Release Dynamic Abrasion Testing Pilot Testing Hysteresis (Heat Buildup) Testing
Best Used For:
Wide range of problem solving applications and analysis.
View Details -
Electric Arc
This process uses materials in wire form, but the heat source is the arcing of two electrically conductive wires. Material is melted and propelled on the part at a greater velocity than metallizing.
Benefits:
Higher temperatures allow for an increased source of base materials, faster rates of deposition, and improved bond and coating density.
Best Used For:
Utilized to apply metal based coatings.
View Details -
Electrically Conductive
Our electrically conductive coatings can be applied to: anti-static idler rollers, anti-static tanks, bins, chutes, silo coatings, and web grounding rollers for charged webs.
Benefits:
Electrical conductivity.
Best Used For:
These coatings are also used in medical and electronic applications.
View Details -
Electrically Insulated
Our electrically insulated coatings can be applied to: bins, chutes, corona treater rollers, silo coatings, web insulated tanks, and support rollers for electrically charged processes.
Benefits:
Electrical insulation.
Best Used For:
They are also used in medical and electronic coating applications.
View Details -
Electrostatic
Through our electrostatic systems we are able to apply: fluorocarbons, fluoropolymers, silicones, epoxies, and Teflon® industrial coatings.
Benefits:
Polymer applied coatings.
Best Used For:
Wide range of polymer coating applications.
View Details -
Embossing Back Up Rollers
Embossing back up rollers are used to create a nip under pressure, which creates a pattern on substrates.
Benefits:
Elastomeric roller coverings maximize performance.
Best Used For:
Embossing Back Up Rollers
View Details -
Embossing Rollers
Embossing rollers are used to create patterns on substrates.
Benefits:
Multiple surface finish roller bases for high performance and long term wear resistance.
Best Used For:
Embossing Rollers
View Details -
Fluidizing Beds
We offer coating solutions that provide wear-resistant, low-friction, non-stick surfaces for fluidizing beds, which deal with difficult to handle materials.
Benefits:
Wear-resistant, low-friction, non-stick surfaces with difficult to handle materials.
Best Used For:
We offer coating solutions that provide wear-resistant, low-friction, non-stick surfaces for fluidizing beds, which deal with difficult to handle materials.
View Details -
Folding Horn
We coat folding horns with durable, wear-resistant, low-friction coatings which increases production throughput and less rejects during the converting process.
Benefits:
Increases production throughput and less rejects during the converting process.
Best Used For:
A wide variety of high temperature applications.
View Details -
FT-IR Spectrophotometric Analysis
FT-IR spectrophotometric analysis is one of the services we offer as part of our analytical property testing.
Benefits:
This is used to understand material composition and peformance characteristics so that the optimal material and finish recommendation can be provided for a given application.
Best Used For:
Wide range of problem solving applications and analysis.
View Details -
Furnace Rollers
Furnace rollers are used to support webs and coils as they travel through ovens.
Benefits:
Products able to operate in temperatures over 600 F.
Best Used For:
Furnace Rollers
View Details -
Guide Rails
Guide rails are used to control web handling for manufacturing and converting processes.
Benefits:
Coat guide rails to assist in the function of the overall unit.
Best Used For:
A wide range of converting processess.
View Details -
Hardness Testing
Harness testing is one of the services we offer as part of our physical property testing.
Benefits:
This type of testing helps us better understand current state and correlate the data to recommendations on better performing materials for the application.
Best Used For:
Wide range of problem solving applications and analysis.
View Details -
Heat Treating
Heat treating is a group of industrial and metalworking processes used to alter the physical, and sometimes chemical, properties of a material.
Benefits:
Alter physical properaties of a base metal.
Best Used For:
Often times products are specified with a heat treating requirement and the company provides this service per the specification required.
View Details -
Heated Piping
Heated piping is coated to maintain uniform temperature across the face of a pipe.
Benefits:
Apply patended SmartHeat technology to keep temperatures uniform.
Best Used For:
A wide range of industries and applications
View Details -
Holding Tanks
We engineer and apply a variety of low friction, high release, and easily cleaned coatings for holding tank interiors.
Benefits:
Extend service life.
Best Used For:
A wide range of industries and applications
View Details -
Hot Melt
We provide release coatings on a number of parts that are exposed to hot-melt adhesives where “no-stick” and release is needed to improve productivity and clean-up.
Benefits:
No-stick and release is needed to improve productivity and clean-up.
Best Used For:
A wide range of converting processess.
View Details -
Hot Melt Pans
Hot melt pans are used to collect excess hot melt adhesive during application.
Benefits:
Offer various coatings designed for wear-resistance and easier cleanability.
Best Used For:
A wide range of converting processess.
View Details -
HVOF
In this process metal particles actually travel faster than the speed of sound, generating the best bond strengths, density and hardness of all our processes.
Benefits:
HVOF does not reach temperatures that are attainable with plasma processes so materials such as ceramicsare not processed with this technique.
Best Used For:
Utilized to apply metal based coatings.
View Details -
ID Grinding
We perform Internal Diameter Grinding on complex parts.
Benefits:
Smooth internal diameter surface finish.
Best Used For:
A wide variety of applications.
View Details -
Ink Tanks
Ink tanks are used to contain ink that is to be applied onto substrates.
Benefits:
Offer various coatings designed to significantly ease the cleanability of the tanks.
Best Used For:
Used in the printing industry.
View Details -
Knurled and Ground finishes
Available in a variety of aluminum and steel, our knurled and ground finishes are available for the manufacturing and repair of custom converting rollers.
Benefits:
Custom finish solutions.
Best Used For:
A wide variety of applications.
View Details -
Laser Cladding
Laser cladding is an additive manufacturing process that utilizes a laser to metallurgically bond performance coatings to a product’s base material.
Benefits:
The process uses the laser to create a melt pool of the base material. The coating material is introduced into this melt pool in either powder or wire form.
Best Used For:
A wide range of cladding applications; including small footprint applications.
View Details -
Lead-in Lead Out Rollers to dryer sections
Lead in and lead out rollers are also used to lead to dryer sections during manufacturing.
Benefits:
They are engineered with durable, non-stick, easily cleaned surfaces.
Best Used For:
Lead-in Lead Out Rollers to dryer sections
View Details -
Lightweight Idler Rollers
Lightweight idler rollers are designed and used for delicate webs or where the lowest inertia is desired. Our rollers are manufactured with thin steel and/or aluminum or cabon fiber to reduce inertia.
Benefits:
Low inertia for high speed web processing machines.
Best Used For:
Lightweight idler
View Details -
Liquid Dispersion
Liquid dispersion is a polymer coating process technique used in a wide variety of applications.
Benefits:
Polymer applied coatings.
Best Used For:
Wide range of polymer coating applications.
View Details -
Low Friction
Reduce the cleanup and buildup of such materials as starches, paints, adhesives, latex, rubber, food, paper, ice, sugar, resins, tapes, inks.
Benefits:
Extremely wear resistant and long lasting.
Best Used For:
Hard base onto your part and then impregnate one of our Low COF release agents into that coating.
View Details
Showing 31–60 of 201 results